Samsung CLP-610 - Manual (Page 47)

7.3
<Troubleshooting>
In the multi-purpose tray
When you print using the multi-purpose tray and the machine detects that
there is either no paper or that the paper has been improperly loaded,
follow the next steps to release the jammed paper.
1 Check if the paper is stuck in the feeding area, and if so, pull it out
gently and slowly.
If you cannot find the jammed paper, or if there is any resistance
removing the paper, stop pulling and go to step 2.
2 Close the multi-purpose tray.
3 Pull the tray1 out.
4 Open the inner cover while you are releasing the inner cover locks
on each side of tray1 with two hands.
5 Pull the paper out gently.
6 Close the inner cover.
7 Replace the tray.
If you cannot find the jammed paper, or if there is any resistance
removing the paper, stop pulling and go to step 8.
8 Using the handle, completely open the front cover.