Samsung CLP-610 User Manual

Page 58

Advertising
background image

7.14

<Troubleshooting>

Curl or wave

• Ensure that the paper is loaded properly.
• Check the paper type and quality. Both high

temperature and humidity can cause paper
curl. (See "Specifications on print media" on
page 4.2.)

• Turn the stack of paper over in the tray. Also

try rotating the paper 180° in the tray.

Wrinkles or creases

• Ensure that the paper is loaded properly.
• Check the paper type and quality. (See

"Specifications on print media" on page 4.2.)

• Turn the stack of paper over in the tray. Also

try rotating the paper 180° in the tray.

Back of printouts
are dirty

Check for leaking toner. Clean the inside of
the machine. Contact a service
representative.

Black pages

• The toner cartridge may not be installed

properly. Remove the cartridge and reinsert
it.

• The toner cartridge may be defective and

need replacing. Remove the toner cartridge
and install a new one. (See "Replacing the
toner cartridge" on page 6.4.)

• The machine may require repair. Contact a

service representative.

Condition

Suggested solutions

Loose toner

• Clean the inside of the machine. Contact a

service representative to clean the inside of
the machine. After cleaning the inside of the
machine, if you still have the same
problems, contact a service representative.

• Check the paper type and quality. (See

"Specifications on print media" on page 4.2.)

• Remove the toner cartridge, and then install

a new one. (See "Replacing the toner
cartridge" on page 6.4.)

• If the problem persists, the machine may

require repair. Contact a service
representative.

Character Voids

Character voids are white areas within parts of
characters that should be solid black:
• You may be printing on the wrong surface of

the paper. Remove the paper and turn it
around.

• The paper may not meet paper

specifications. (See "Specifications on print
media" on page 4.2.
)

Horizontal stripes

If horizontally aligned black streaks or smears
appear:
• The toner cartridge may be installed

improperly. Remove the cartridge and
reinsert it.

• The toner cartridge may be defective.

Remove the toner cartridge and install a
new one. (See "Replacing the toner
cartridge" on page 6.4.)

• If the problem persists, the machine may

require repair. Contact a service
representative.

Curl

If the printed paper is curled or paper does not
feed into the machine:
• Turn the stack of paper over in the tray. Also

try rotating the paper 180° in the tray.

Condition

Suggested solutions

Advertising
This manual is related to the following products: