Samsung CLP-610 - Manual (Page 53)

7.9
<Troubleshooting>
Replace Fuser The life of the fuser
unit is expired. Replace the fuser unit
with a new one.
Contact the service
representatives.
Replace Fuser
Soon The life of the fuser
unit will be expired
soon. Replace the fuser unit
with a new one.
Contact the service
representatives.
Replace Transfer
Belt The life of the
transfer belt is
expired. Replace the paper
transfer belt with a
new one. Contact the
service
representatives.
Replace Transfer
Belt Soon The life of the
transfer belt will be
expired soon. Replace the transfer
belt with a new one.
Contact the service
representatives.
Replace [yyy]
Pick-Roller The life of the tray
pick-up roller has
expired. Replace the pick-up
roller with a new one.
Contact the service
representatives.
Self Diagnostics
LSU The LSU (Laser
Scanning Unit) in
your machine is
checking problems
detected. Wait a few minutes.
Self Diagnostics
Temperature The engine in your
machine is checking
problems detected. Wait a few minutes.
Sleeping... The machine is in
the power save
mode. When data is
received, it switches
to on-line
automatically.
System Fan
Locked There is a problem
with the main fan for
the machine. Cycle power. If the
problem persists,
contact the service
representatives.
Message Explanation Solution
Toner Empty The toner cartridge
which the arrow
indicates has run
out.
Stop
Note
If the black toner
cartridge is empty,
Black Only
message does not
appear.
You can select the
option among Stop,
Continue or Black
Only with the left/right
arrow. If you select
Stop by pressing OK
on the control panel,
the machine stops
printing. If you select
Continue, the
machine keeps
printing, but the
quality cannot be
guaranteed. If you
select Black Only,
the machine prints
the data in black. In
this case, the mono
printing feature is
preset in the printer
properties.
If you do not select
any, the machine will
work as Stop is
selected. Replace the
corresponding toner
cartridge with a
Samsung-genuine
cartridge. (Page 6.4)
Toner Exhausted The lifespan of the
toner cartridge
which the arrow
indicates is reached. This message
appears when the
toner is completely
empty, and your
machine stops
printing. Replace the
corresponding toner
cartridge with a
Samsung-genuine
cartridge. (Page 6.4)
Toner Low The toner cartridge
which the arrow
indicates is almost
empty. Take out the
corresponding toner
cartridge and
thoroughly shake it.
By doing this, you can
temporarily
reestablish printing
operations.
(Page 6.3)
Tray 2
Paper Jam 0 Paper has jammed
in the optional tray. Clear the jam.
(Page 7.6)
Message Explanation Solution