Siemens CX203isdn - Manual (Page 88)

87
Date and Time
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / time_calendar.fm / 14.11.2005
Entering the start and end time for Night service
By default, the Start time
is pre-set to 20:00 or 8:00 pm, and 08:00 or 8:00 am for the
End time .
s
INT11: Internal 11
Select internal number, e.g. INT11: Internal 11
( ‰ = set).
or ... Select the answering machine (for CX253isdn):
s
Answering mach. Select the menu item and confirm.
s
AM2 Select the answering machine you would like
e.g. AM2. The calls are forwarded to the selected
answering machine.
... then
j
Hold down (back to idle status).
OK
i
◆ Night service, internal: If the internal user is not registered or cannot
be reached (e.g. terminal deactivated), the call is not signalled and
the caller receives the busy signal.
◆ Night service to an answering machine: Even if the answering
machine is deactivated, a call is signalled on the answering machine
and the answering machine takes the call after the set number of
rings (page 76).
i
Open the menu.
s
Set base Select the menu item and confirm.
s
Night service Select the menu item and confirm.
s
Select MSN and confirm, e.g. MSN1: Anna.
either ... Enter the start time:
s
Start time Select the menu item and confirm.
~
Enter the start time (4-digit).
or ... Enter the end time:
s
End time
Select the menu item and confirm.
~
Enter the end time (4-digit).
... then
W Press the display key to open the submenu.
Save entry
Confirm.
j
Hold down (back to idle status).
OK
OK
OK
OK
OK
OK