Diverting calls, Diverting calls internally – Siemens CX203isdn User Manual
Page 98
97
System settings
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / settings_bs.fm / 14.11.2005
Diverting calls
Diverting calls internally
By factory default, internal call divert is deactivated.
Setting up a destination
Activating/deactivating internal call diversion
Precondition: Internal call diversion can only be activated if a destination has been set
up.
i
To make this function easier to use, you can also set one of the function
keys accordingly (page 115).
i
◆
Only one destination can be selected for internal call diversion.
◆
Only one-level call diversion is supported: If the subscriber to which
you divert your calls has activated their own call diversion, this is no
longer effective. The diverted call is always signalled at the subscriber
you diverted it to.
i
Open the menu.
s
Set base
Select the menu item and confirm.
s
Forward. base
Select the menu item and confirm.
~
Enter system PIN if required (page 89).
s
Forward. dest.
Select the menu item and confirm.
s
INT11: Int.11
Select internal number, e.g. INT11: Int.11.
(
‰
= activated).
OK
OK
OK
OK
i
Open the menu.
s
Set base
Select the menu item and confirm.
s
Int. call forw.
Select the menu item and confirm.
~
Enter system PIN if required (page 89).
either ...
Activate:
Activate?
Confirm.
or ...
Deactivate:
Deactivate?
Confirm.
OK
OK
OK
OK
OK