Schumacher Automatic CR1 - Manual (Page 5)

• 4 •
TROUBLESHOOTING 9.
PROBLEM POSSIBLE CAUSE REASON/SOLUTION
Power light will not turn on. AC outlet is dead.
Poor electrical connection.
Check for an open fuse or
circuit breaker supplying the
AC outlet.
Check the power cord and
extension cord for a loose
fitting plug.
Charger makes a loud buzz
or hum.
Transformer laminations
vibrate (buzz).
No problem; this is a normal
condition.
CHARGING LED is
flashing.
Charger is in abort mode. See Section 7 OPERATING
INSTRUCTIONS – Aborted
Charge.
CHARGED LED is
flashing.
Battery is 80% charged and
is “ready to use”.
See Section 7 OPERATING
INSTRUCTIONS – Quick
Charge.
BEFORE RETURNING FOR REPAIRS 10.
When a charging problem arises, make certain that the battery is capable of accepting 10.1
a normal charge. Double check all connections, the AC outlet for a full 120-volts and the
quality of the connections from the connector to the battery system. The connector must
be clean.
When an UNKNOWN OPERATING PROBLEM arises, please read the complete manual
10.2
and call the customer service number for information that will usually eliminate the need
for return.
If the above solutions do not eliminate the problem or for information about troubleshooting,
call toll-free from anywhere in the U.S.A.
1-800-621-5485
7:00 am to 5:00 pm Central Time Monday through Friday
SPECIFICATIONS 11.
Input Voltage ........................................................................................................ 120 VAC
Output Current Rating .......................................................................................12V – 3.0A
............................................................................................................................ 6V – 3.0A
Maximum Charge Voltage ...............................................................................12V – 15.4V
............................................................................................................................ 6V – 7.7V
Maintain Voltage .............................................................................................12V – 13.6V
............................................................................................................................ 6V – 6.8V
Size .....................................................................................................2⅝" H x 6" W x 3" D
Weight ......................................................................................................................2½ lbs
REPLACEMENT PARTS
12.
Power Wheels ®
12V Battery Connector Cable Assembly ......................................................3899002452
Power Wheels ® /Kid Trax ®
Small 6V Battery Connector Cable Assembly ..............................................3899002454
Peg Perego ®
12V Battery Connector Cable Assembly .....................................................3899002456