Advanced recording, Grabación avanzada, Español – Samsung AD68-00839J User Manual

Page 57: English, Cutting off wind noise (wind cut), Corte de ruido del viento (wind cut <antiviento>)

Advertising
background image

The Wind Cut function works in both Camera and Player (Audio dubbing)
modes.
Use the Wind Cut when recording in windy places such as the beach or near
buildings.

The Wind Cut function minimizes wind noise or other noise while recording.
- When the wind cut is on, some low pitched tones are eliminated along with

the sound of the wind.

1. Set the Power switch to CAMERA or PLAYER.

2. Set the Mode switch to TAPE.

(VP-D353(i)/D354(i)/D355(i) only)

3. Press the MENU button.

4. Move the Menu selector to the left or right to select Record,

then press the Menu selector.

5. Move the Menu selector to the left or right to select Wind

Cut, then press the Menu selector.

6. To activate the Wind Cut function, move the Menu

selector to the left or right to select On, then press the Menu
selector
.

7. To exit, press the MENU button.

Wind Cut (

) icon will be displayed on the LCD screen

when you turn the Wind Cut On.

[ Note ]
Make sure Wind Cut is set to off when you want the microphone
to be as sensitive as possible.

La función Wind Cut <Antiviento> está operativa en las modalidades Camera
y Player (Grabación de audio adicional).
Use la función Wind Cut cuando grabe en lugares donde sople el viento,
como en la playa o cerca de edificios.

Esta función minimiza el ruido del viento y otros ruidos durante la grabación.
- Cuando esta función está activada, se eliminan algunos sonidos graves

junto con el del viento.

1. Coloque el interruptor Power en CAMERA o PLAYER.

2. Coloque el interruptor Mode en TAPE.

(Sólo VP-D353(i)/D354(i)/D355(i))

3. Pulse el botón MENU.

4. Mueva el Selector de menú a la izquierda o a la derecha

hasta seleccionar Record <Grabar> y pulse el Selector
de menú
.

5. Mueva el Selector de menú a la izquierda o a la derecha

hasta seleccionar Wind Cut <Antiviento> y pulse el
Selector de menú.

6. Para activar la función Wind Cut, mueva el Selector de

menú a la izquierda o a la derecha hasta seleccionar On
<Actv.>,
y pulse el Selector de menú.

7. Para salir, pulse el botón MENU.

(

) aparece en la pantalla LCD cuando se activa

Wind Cut <Antiviento>.

[ Nota ]
Asegúrese de que la función Wind Cut esté desactivada
cuando desee que la sensibilidad del micrófono sea la
mayor posible.

ESPAÑOL

56

56

ENGLISH

Advanced Recording

Cutting Off Wind Noise (Wind Cut)

Grabación avanzada

Corte de ruido del viento (Wind Cut <Antiviento>)

Move

Select

Exit

MENU

Camera Mode

Back

Rec Mode
Audio Mode

Wind Cut

Camera Mode

√Record

Rec Mode
Audio Mode
Wind Cut

√SP
√12Bit
√Off

Move

Select

Exit

MENU

Off
On

4

6

60min

0:00:10

SP

STBY

7

œ

Advertising