Audio select (continued) – Sharp 32C230 User Manual
Dimension: 140 X 215 mm
When the “[” mark is at “AUDIO ADJUST”, press VOL +/– to
access the AUDIO ADJUST screen. To access the desired item,
press CH 8/9. To adjust the audio setting, press VOL +/–.
Press MENU to exit.
An example screen displaying ON AIR when receiving stereo broadcasts
Current channel number
← ON AIR” will appear next to STEREO or
SAP when receiving STEREO or SAP
• Once MONO mode is selected, the TV sound remains monaural even if the TV set receives a stereo
broadcast. You must switch the mode back to STEREO if you want to hear stereo sound again.
• Selecting MTS while receiving video signals from INPUT terminals does not change the type of
sound; in this case, sound is determined by the video source.
Audio Select (Continued)
A I R
A I R
(CHANNEL call on screen)
VOL + button
VOL – button
To increase treble response.
To decrease treble response.
To increase bass response.
To decrease bass response.
To emphasize the right
To emphasize the left
To return all adjustments to factory preset levels.
TREB L E
13/3/03, 12:32 PM