Sony CD-R/RW - Manual (Page 4)

Precautions
■ Installation
● Avoid placing the drive in a location subject to:
– high humidity
– high temperature
– excessive dust
– mechanical vibration
– direct sunlight.
Only horizontal drive operation recommended, not vertical or tilted.
■ Operation
● Do not move drive during operation, it may cause an error.
● Avoid sudden temperature changes, condensation may form inside
the drive. Should ambient temperature suddenly change, wait at
least 1 hour before turning off power. Operation immediately after
temperature change may cause a malfunction.
■ Transportation
● Keep the original packing materials for future transport of the drive.
Hardware Installation
Installing the Drive Unit into the Computer
This example assumes an IBM-PC/AT* compatible computer,
a SCSI adapter card and a SCSI interface cable (50 pin flat) are at-hand.
Getting Started
Assure SCSI adapter is operational before installing CD-R/RW drive.
● Prepare the necessary parts and tools not supplied:
– a screwdriver
– Two mounting rails if computer has mounting racks.
Precautions/Hardware Installation 7
Location and Function of Parts and Controls
Front Panel
Rear Panel
6 Location and Function of Parts and Controls
0 1 2
AUDIO OUT
R GND L
INTERFACE CONNECTOR
DC INPUT
5V ± 5% GND 12V ± 10%
ACTIVE TERM
TEST
ID SELECT
Power-in connector
SCSI bus interface connector Audio output connector
Jumper block for SCSI bus
Headphone
Volume
Control Busy
Indicator Disc Drawer Emergency
Eject Hole Eject
Button Headphone
Jack