Sony CD-UX71 - Manual (Page 36)

ICD-UX71/UX81/UX71F/UX81F/UX91F 4-114-023-41(1)

GB
3
Press  or  on the control button
to select “SYNC REC,” and then press
ENT.
4
Press  or  on the control button
to select “ON,” and then press ENT.
5
Press  (stop) to exit the menu
mode.
6
Connect other equipment to the IC
recorder when the IC recorder is in
the stop mode.
Connect the audio output connector
(stereo mini-plug) of other equipment
to the  (microphone) jack of the IC
recorder using an audio connecting
cable*.
“SELECT INPUT” appears in the display
window.
7
Press  or  on the control button
to select “AUDIO IN,” and then press
ENT.
8
Press  (record/pause) to start
recording.
“
” flashes and the IC recorder
enters the recording pause mode.
9
Start playback on the component
connected to the IC recorder.
“
” appears on the display and
synchronized recording starts.
The synchronized recording pauses
when no sound is detected for more
than 2 seconds, and “ ” flashes.
The IC recorder starts recording again as
a new message when sound is detected.