Sony STR-DG2100 - Manual (Page 41)

41 GB
G
e
tting Star
te
d
8: Setting the speakers
Set the appropriate speaker impedance for the
speakers you are using.
1
Make sure that the AMP button
is lit.
If it is not lit, or “GUI MODE” is not
displayed in the display window of the
receiver, follow the steps given in “7:
Operating the receiver using the GUI
(Graphical User Interface)” (page 38).
2
Press V/v repeatedly to select
“Settings,” then press or b.
The Settings menu list appears on the TV
screen.
3
Press V/v repeatedly to select
“Speaker,” then press or b.
4
Press V/v repeatedly to select
“Impedance,” then press .
5
Press V/v repeatedly to select
“4
Ω” or “8 Ω” depending on
the speakers you are using,
then press
.
Notes
• If you are not sure of the impedances of the
speakers, refer to the operating instructions
supplied with your speakers. (This information is
often on the back of the speaker.)
• When you connect all speakers with a normal
impedance of 8 ohms or higher, set “Impedance” to
“8
Ω.” When connecting other types of speakers,
set it to “4 Ω.”
• When you connect front speakers to both the
SPEAKERS A and B terminals, connect the
speakers with a normal impedance of 8 ohms or
higher.
Setting the speaker impedances
2-5
1
continued