Parts and their functions, Register front view register rear view, External view – Sharp TINSZ2602RCZZ User Manual

Page 6: Printer

Advertising
background image

4

PARTS AND THEIR FUNCTIONS

Register front view

Register rear view

Use only the USB cable supplied with the XE-A406 for the connection with a PC. Never use other
cables.

External View

1

The printer is a receipt/journal dual station type thermal printer, and therefore it
does not require any type of ink ribbon or cartridge.

Lift the rear of the printer cover to remove. To re-install, hook the pawls on the
cabinet and close.

Caution: The paper cutter is mounted on the printer (receipt side). Be

careful not to cut yourself.

Print head release lever
The print head can be lifted by the green lever on the
right side of the printer. Pulling the lever forward lifts
up the print head. If the paper becomes jammed and
you need to move the head farther forward, you can
pull the lever even further toward you and proceed with
the removal of the jammed paper.

Do not attempt to remove the paper roll
with the head in the down position. This
may result in damage to the printer and
print head.

Printer

2

SD card slot

USB port

(Refer to page 71.)

Operator display

Receipt paper

Journal window

Drawer lock

Drawer

Printer cover

Customer display
(Pop-up type)

Mode switch

AC power cord

Keyboard

Print head
release lever

Paper roll cradle

Take-up spool

Paper chute

A406_1 09.10.14 9:02 AM Page 4

Advertising
This manual is related to the following products: