Sony CMT-A70 - Manual (Page 36)

36
Setting up the AM loop antennas
3
Connecting the AC power cord
1 Connect the power cord from the left
speaker to the SPEAKER OUT
(POWER IN) socket located at the
rear of the player.
2 Insert the end of the AC power cord
from the left speaker to the wall
outlet.
Note
If you disconnect the mains lead or a blackout has
occurred, the clock setting and other preset
settings may return to the initial settings. In this
case you need to reset the clock and/or other
preset settings.
Hooking up the system
(continued)
4
Inserting batteries into the remote
Insert two size AAA (R03) batteries
(not supplied).
Replacing batteries
With normal use, the batteries should last for
about six months. When the remote no
longer operates the player, replace all the
batteries with new ones.