Smart Technologies Smart Board 6055i/8055i SMP/8055ie-SMP - Manual (Page 19)

l
Attach the speakers and connect the speaker wires to the interactive flat panel before you
wall-mount it. For more information, see Installing the speakers on page 14.
Important mounting considerations for trained installers
Consider the following when mounting the interactive flat panel on a wall:
l l
Plan your workflow to include cabling because some cable connection points might not be
accessible after installation.
l
Carry and lift the interactive flat panel by gripping the handles and sides.
l
To mount the interactive flat panel on a wall, you require a standard VESA 600 mm × 400 mm
compatible wall mount bracket (not included). The wall mount bracket must have minimum
depth of 14 mm to ensure sufficient space for the speakers.
l
Use M8 screws to fasten the wall bracket. The screws must be 14–15 mm long plus the
thickness of the bracket and the washer.
l
The recommended fasten force is 99.57–121.70 in-lb. (11.25–13.75 N·m).
l
Refer to the instructions included with the mounting equipment for more detailed information.
Choosing a mounting location
Consider the following when you select a location for the interactive flat panel:
l
The wall must be strong enough to support the interactive flat panel and the mounting
equipment. The interactive flat panel weighs 98 lb. (44.5 kg).
l
Do not install the interactive flat panel in a location where a door or gate could hit it.
C H A P T E R 2
Installing your interactive flat panel
11