Smart Technologies Smart Board 6055i/8055i SMP/8055ie-SMP - Manual (Page 45)

9. Press Save Tool Settings to save your settings.
10. Optionally, repeat steps 4 through 9 to customize other pens.
11. Press OK to close SMART Settings.
Using Locked Ink mode
Locked Ink mode enables you to write or draw digital ink using large objects, including eraser-sized
objects.
g To use Locked Ink mode
Press and hold a color button on the color select module until the light flashes.
g To end Locked Ink mode
Press any color button that isn't flashing on your color select module.
Erasing digital ink
g To erase digital ink
Pick up the eraser, and then press the eraser on the screen and move it over the digital ink you
want to erase.
OR
Using your flattened fist, press the screen and move your hand over the digital ink you want to
erase.
C H A P T E R 5
Using your interactive flat panel
37