Smart Technologies Smart Board 6055i/8055i SMP/8055ie-SMP User Manual
Page 36
Turning on and turning off your interactive flat
panel
g
To turn on your interactive flat panel
N O T E
If presence detection is enabled, the interactive flat panel turns on and the welcome screen appears
automatically when people enter the room. Dismiss the welcome screen by touching the interactive
flat panel screen. For more information, see Understanding presence detection on the next page
1. Turn on your computer.
2. Press the Power button
on the front control panel.
You can also press the POWER ON button on the remote control.
Your computer’s logon screen or desktop appears on your interactive flat panel.
I M P O R T A N T
If the power button light on the front control panel is off, either the interactive flat panel is not
plugged in or the main power switch on the bottom terminal panel is turned off. To find the
main power switch, see Back view on page 7.
g
To turn off your interactive flat panel
1. Turn off your computer.
2. Press the Power button
on the front control panel.
You can also press the STANDBY button on the remote control.
N O T E
If presence detection is enabled, the interactive flat panel turns off automatically when the
sensors no longer detect people in the room. For more information on presence detection
settings, see Proximity control settings on page 79
C H A P T E R 5
Using your interactive flat panel
28