Sierra Wireless 20070914 - Manual (Page 31)

Activating PinPoint X on AT&T Network
Rev 3.0B Feb.08 18
1. Start AceManager
Start > All Programs > AirLink Communications > AceManager 3G
> AceManager 3G
Figure 3-7: AceManager
2. Connect to the Modem
a. Click the Connect button.
b. Select a connection method:
· If you are connecting locally with the modem connected
directly to your computer using a serial cable, you can
use PPP.
· If you are connecting locally with the modem connected
directly to your computer using an Ethernet cable, you
can use UDP, TCP, or Ethernet.
c. Enter the connection information.
· For UDP or TCP, enter 192.168.13.31 as the IP address.
· For PPP, select the COM port to which the modem is
connected.