Sharp COLORINKJET AJ-5030 - Manual (Page 120)

Messages and Signals
118
MEMORY IS FULL The memory is full. This may occur during fax
reception if too much data is received before the
pages can be printed out. If faxes have been received
to memory because printing is not possible (an
additional message will indicate the problem), resolve
the problem so that printing can continue (see
Substitute Reception to Memory on page 84). If you
are attempting to transmit from memory, see If the
memory becomes full on page 62.
MEMORY PRINTING The machine is preparing to or printing out a
document from memory.
NO DATA This appears if you attempt to search for an
automatic dialing number when none have been
stored.
NO # STORED You have tried to dial or clear a Rapid Key or Speed
Dial number that hasn’t been programmed (a full
number hasn’t been assigned to it).
ON HOOK DIAL The SPEAKER key has been pressed and the
machine is waiting for you to dial.
OUT OF PAPER You are out of printing paper. Load paper as
explained in Loading Printing Paper on page 20.
PAPER JAMMED The printing paper is jammed. See the following
section, Clearing Paper Jams.
TOTAL PAGE(S) 01 Number of pages transmitted, received, or copied.
all.book Page 118 Wednesday, January 31, 2001 4:29 PM