Sharp COLORINKJET AJ-5030 - Manual (Page 54)

Using the Auto Document Feeder
52
Copy Cut-off
Note: This setting is only for copies made from the auto document feeder. It
is not effective when you load the original on the document glass.
When making a copy of a document that is longer than the printing
paper, use the copy cut-off setting to select whether the remaining part
of the document will be cut off or printed on a second page. The initial
setting is YES (cut off the remainder). To change the setting, follow
the steps below.
1
Press these keys:
The display will show:
2
Press 1 to set copy cut-off to YES (the
remaining part of the document will
not be printed), or 2 to set copy cut-
off to NO (the remaining part will be
printed on a second page).
COPY CUT-OFF
1=YES, 2=NO
3
Press the STOP key to return to the
date and time display.
or
YES NO
1 2
STOP
FUNCTION
5 2
all.book Page 52 Wednesday, January 31, 2001 4:29 PM