Smart Technologies SMART Hub SE240 - Manual (Page 14)

8 | CHAPTER 2 – CONFIGURING YOUR HUB
Orienting Your SMART Product
When your SMART product uses its default orientation data, the touch point on the
screen corresponds to the projected image, provided the projected image fills the
entire interactive screen. However, the projected touch point might be offset from the
actual touch point in some situations. Resolve this issue by orienting your
SMART product.
IMPORTANT
•
Before orienting your hub, download the latest version of firmware for your
hub from the
SMART Support website .
• Orient your SMART product with your hub before orienting it with other
connected computers.
To orient your SMART
product with your hub
1. Select System > Settings.
The Settings dialog box appears.
2. Press Orient.
The orientation screen appears.
3. Using a pen tray pen, press and release the center of the first target.
4. Repeat step 3 for each target.
The orientation data saves to your hub’s memory.
Connecting Your Computer to a Hub
You can connect two computers to the SMART Hub SE240, and one computer to the
SMART Hub VE220 to view input on your SMART product’s display. Both models
enable you to:
• Write and draw in digital ink.
• Freeze the display.
• Take screen captures.
• Use the on-screen keyboard and right-click features of your hub firmware.