Smart Technologies SMART Hub SE240 - Manual (Page 35)

29 | CHAPTER 2 – CONFIGURING YOUR HUB
TFTPPortNum User defined Use 69 as the TFTP
port number.
SNTPServer User defined Use the SNTP server. For
instance, time-a.nist.gov.
SNTPPortNum User defined Use 123 as the SNTP
port number.
SNMPEnable • false
• true
Enables SNMP support.
AUTO_UPDATE_MODE 0: Disabled
1. 00:00:00
2. 04:00:00
3. 08:00:00
4. 12:00:00
5. 16:00:00
6. 20:00:00
Time in SNTP at which your hub
checks the TFTP server for
updated settings or
configuration information.
SNMPUseSettingsP/W • false
• true
Uses the settings instead of
manually configuring the read/
write
community strings.
SNMPSysContact User defined System contact information.
SNMPSysLocation User defined System location information.
SNMPReadCom-
mString User defined SNMP read community string.
SNMPWriteCom-
mString User defined SNMP write community string.
SNMPTrapAddress User defined Sends your SNMP traps to
this location.
RmCtlTelnetEnable • false
• true
Enables TELNET room control
(SE240 only).
RmCtlTelnetPortNum User defined Uses 23 as the port’s
default number.
EthernetEnable • false
• true
Enables the Ethernet port.
USBStorageEnable • false
• true
Enables USB storage support.
Key Value Description