Siemens 2060isdn - Manual (Page 13)

Installation
13
I_KAP01.FM5
Gigaset 2060isdn, Inland:
8.12.98 A30853-X210-B101-1-19
3. Then back to the mobile unit
● You can register your comfort mobile unit at a maxi-
mum of six base stations.
● You can register a maximum of 8 mobile units at a
base station. If you start the registration procedure
and 8 mobile units are already registered, the mes-
sage “No free internal No.” appears in the display
when you enter the system code.
● If is advisable to have base-station number display ac-
tivated if you have your mobile unit registered at more
than one base station.
System code
As described in the instructions for the procedures in-
volved, you have to enter the four-digit system code in or-
der to initialize your base station or change settings. The
default system code is “0000”. You have to use this default
system code when you register the first mobile unit.
There is a separate mobile-unit PIN which you use to lock
a particular mobile unit.
1 … 8 Key in the internal number you want to assign to the mo-
bile unit.
x
Confirm your choice of internal number. This concludes
the registration procedure and a message to this effect
appears in the display, for example “Unit registered with
internal No. 2”.
OK
It is advisable to change the system code after
you register the first mobile unit (see “Entering
the PIN“ in the User Guide for the mobile unit
and page 22). The system code “locks” your
system to prevent unauthorized access. No fur-
ther mobile units can be registered or changes
made to system settings without this system
code.
t means: browse withu or u and press x to confirm Z NEXT OK