Siemens 2060isdn - Manual (Page 79)

Operation with door intercoms
79
I_KAP04.FM5
Gigaset 2060isdn, Inland:
8.12.98 A30853-X210-B101-1-19
There are also certain changes which apply to the various
entrance telephones:
Ring allocation for the door intercom
If you want to install a door intercom you can decide
which internal users can be reached from the entrance
telephone. The internal users you define in this way can
also operate the door opener.
t Meaning: see footnote
Grothe TS 6216 RITTO 5760 SIEDLE TLM 511
Entrance telephone Changes in intercom
SIEDLE TLM 511/01 Open jumpers 1, 3 and 4.
Disconnect loudspeaker wire from
pin “bl” and connect to “12”.
RITTO 5760 Grothe No change
Move the yellow jumper from “B”
to “0”
Ž The comfort mobile unit is idle. You will be prompted to
enter the system code in the course of this procedure
(default code: “0000”).
.t Service t System settings t Device data t a/b line
t a/b line 9 Select “a/b line 9” as the line for the supplementary de-
vice.
t
new: Door sta-
tion
Select “Door station” from the “Device type” menu and
confirm your choice. A list of the current internal numbers
is displayed:
“Door call to 1 2 _”
x
Press this key if you merely want to check the setting.
or
@ ... 8
x
Add a single-digit internal number, for example 4, to the
list. Use the softkey to correct your entry if neces-
sary.
Save your entry to activate the new ring allocation, in this
example
“Door call to 1 2 4 _”.
OK
SAVE
X
t means: browse withu or u and press x to confirm Z NEXT OK