Sharp 54GS-61S - Manual (Page 9)

8
Switching on
Power supply on/off button
This TV memorizes the Mode last used when it was switched off. When the main power button ( ćl) is pressed to turn on
the set, the power indicator will light and the set will resume in either the Stand-by mode or Programme mode, depen-
ding upon its condition when it was switched off.
On-Off/Stand-by button
When the TV is in Stand-by mode, to turn ON the TV press the Stand-by but-
ton (
æ TV) on the remote control, or one of the four buttons on the TV
( Va/\, VCH/\ ). The TV will change from Stand-by mode to Program
mode, the sound indicator will light a few moments and an image will appear
on the screen. Press the Stand-by button (
æ TV) again and the TV will return
to Stand-by mode.
Blue back off timer
If noise appears in TV or VCR mode, the screen turns blue. The blue back off-timer is then engaged and will automati-
cally switch the set to Stand-by mode after 15 minutes.
Real Channel Number (terrestrial/cable TV Programmes)
Channel setting is mainly performed using the remote control. Please follow the instructions with the remote control in
hand.
Television broadcasting stations have channel numbers assigned to them (real channel numbers). You can assign your
own channel number to a real channel and store it in the programme channel memory.
CORRESPONDING REAL CHANNEL
STATION SIGNALS REAL CHANNEL NUMBER ESPECIALLY AVAILABLE
V E-2 ~ E-4 CH 02 ~ CH 04
H E-5 ~ E-12 CH 05 ~ CH 12
F A ~ H CH 13 ~ CH 20 In Italy
UHF E-21 ~ E-69 CH 21 ~ CH 69
C M1/S1 ~ M10/S10 CC 01 ~ CC 10
U1/S11 ~ U10/S20 CC 11 ~ CC 20
A
S21 ~ S41 CC 21 ~ CC 41
M1 ~ M7 CC 42 ~ CC 48
In Holland T
B1 ~ B7 CC 49 ~ CC 55
V
S’1/S21 ~ S’5/S25 CH 75 ~ CH 79 I n Switzerland
Power Indicator
Main power button
54GS-61S
Power Indicator
Main power button
70GS-61S