Introduction, Features, Software requirements – Sony CDU 5211 User Manual

Page 6

Advertising
background image

8

© 2001 - Sony Australia

9

© 2001 - Sony Australia

Features

The CDU 5211 is an internal CD-Rom (Compact Disc - Read Only

Memory) drive unit designed for use with personal computers. It comes

with the following features:

General

•

Speed: 52X max / 40X default.

•

“Maximum Speed Choice” function.

•

40 Pin ATAPI - IDE interface.

•

5

1

/

4

inch half-height drive form factor.

•

Power loading and eject of a disc.

•

ABS (Auto Balance Spindle) to reduce noise and vibration.

•

128 KB of buffer memory.

•

Power saving functions.

•

Vertical mount ability.

•

Small CPU bandwidth consumption.

•

Software volume control.

•

Easy audio CD-DA control button.

Supported Disc Formats

The CD 5211 is a “Multiread” compliant drive and can read data in each

of the following formats:

CD-DA, CD-ROM Mode-1, CD-ROM/XA Mode-2 Form-1 &

Form-2, CDI-Ready, Photo-CD, Karaoke-CD, Video CD (MPEG-1),

Enhanced CD, CD Extra, I-Trax CD, CD-Text, UDF.

Media Types

CD-ROM, CD-R and CD-RW.

12cm & 8cm discs.

Audio

•

Outputs 16-bit digital data over the ATA interface.

•

Audio line output (rear panel) and headphones jack (front panel) for

audio CD playback.

INTRODUCTION


Software Requirements

Reading Data

For your computer to recognise your new CD-Rom drive and to be able to

access data from it, the correct device drivers must be installed.

Most modern operating systems such as Microsoft® Windows 95™,

Windows 98™, Windows ME™, Windows NT4™ and Windows

2000™ along with most versions of Linux and OS/2™ include these

drivers as standard in the operating system, hence no additional drivers are

required for reading discs on these operating systems.

Windows 3.xx™ and MS-DOS™

If you require the drive to be recognised by Microsoft Windows 3.xx or

MS-DOS you will need to install the MS-DOS™ device driver. It can be

downloaded from our support web site:

http://www.sony.com.au/support/itp


NOTE: If using Windows 95 or later and you have previously

installed the MS-DOS device driver it is recommended that you disable

or remove MS-DOS device driver as it will decrease performance.

INTRODUCTION

Advertising