Sending a fax after talking (manual transmission) – Sharp MX-M350U User Manual

Page 70

Advertising
background image

USING AN EXTENSION PHONE

5-4

SENDING A FAX AFTER TALKING (MANUAL TRANSMISSION)

If the other fax machine is set to manual reception, you can talk to the other party and then send a fax without
breaking the connection. This procedure is called manual transmission.

1

Make sure the machine is in fax mode.

When the [IMAGE
SEND] key light is on,
the machine is in fax
mode.
If the light is not on,
press the [IMAGE
SEND] key.
If the network scanner
option is installed, touch
the [MODE SWITCH]
key and then the [FAX]
key to switch to fax
mode.

When fax mode is
selected, "FAX" appears
in the top half of the
[MODE SWITCH] key.

2

Load the original. (see page 1-7)

3

Set the original size, resolution, exposure
and other scanning conditions as needed.

MANUALLY SETTING THE SCANNING SIZE
(see page 1-8)
SELECTING THE RESOLUTION (see page 1-10)
SELECTING THE EXPOSURE (see page 1-11)

4

Lift the extension phone.

5

Dial the number of the other party or touch
a one-touch key.

If the address book
screen appears, touch
the [CONDITION
SETTINGS] key to
display the condition
settings screen (see
page 1-4).

You cannot use a group key or a one-touch key
that includes a sub-address and passcode.

6

Speak to the other party when they
answer.

7

After the other party switches to fax
reception, press your [START] key.

Transmission begins.

8

Replace the extension phone.

NOTE
Automatic redialing (see "If the receiving party is busy" on page 2-8) will not take place if the line is busy.

NOTE
If you have loaded the original on the document
glass, you can only send one page by manual
transmission.

FAX

E-MAIL/FTP

MODE SWITCH

INTERNET FAX

SPEAKER

MODE SWITCH

FAX

CORPO.TPS

SHARP GROUP

SPEA

Advertising
This manual is related to the following products: