Siemens SE105 - Manual (Page 19)

18
Configuring the local network
Gigaset Router / de / A31008-E105-B100-2-19 / configure_tcpip.fm / 05.06.2003
Network configuration for Windows 98, 98 SE, ME
To integrate a PC with Windows 98, 98 SE or ME in a local network via a Gigaset Router:
1. Set up the PC as Client for Microsoft Networks (see below).
2. Select computer names and workgroup (see page 19).
3. Install the TCP/IP protocol (see page 20).
4. Make TCP/IP protocol settings (see page 21).
5. Deactivate the http proxy (see page 25).
6. Synchronise the TCP/IP settings with the Gigaset Router (see page 26).
Setting up a PC as Client for Microsoft Networks
Before the PCs on your network can work together, you have to configure them as
Microsoft Network Client s. This can be done as follows:
◆ Click on Start – Settings – Control Panel.
◆ Double click on the Network icon and then open the Network tab in the
Configuration window.
◆ Check whether the list of components contains the entry Client for Microsoft
Networks.
◆ If it is not there click on Add.
◆ Select as network component type Client and click on Add.