Configuring wireless connections, Activating the wireless module, Setting the channel and ssid – Siemens SE105 User Manual

Page 71

Advertising

Configuration with Advanced Setup

Gigaset Router / de / A31008-E105-B100-2-19 / configure_router.fm / 05.06.2003

Configuring Wireless Connections

If you want to connect PCs in wireless mode via the Gigaset SE105 dsl/cable, you will

have to configure the router as an

. Use Wireless Settings for this

configuration. Here you can

◆

activate the router's wireless module (see below),

◆

change the wireless channel and the Service Set ID (

) of the router (see below)

and

◆

set

for wireless transmissions (see page 72).

Activating the wireless module

Wireless devices can register with your router only if its wireless module has been

activated.

◆

Open the Wireless menu.

◆

Activate the wireless module on Wireless Settings.

◆

Click on APPLY.

Setting the Channel and SSID

Before wireless network components can communicate with each other, you have to

use a shared wireless channel and the same

(Service Set Identifier).

The Gigaset SE105 dsl/cable comes supplied with the SSID configured

asConnectionPoint. For security reasons, it is advisable to change this SSID and

deactivate the broadcast function (SSID visible).

◆

In the Wireless menu, select Channel and SSID.

Advertising