Remote management – Siemens SE105 User Manual
Page 64
63
Configuration with Advanced Setup
Gigaset Router / de / A31008-E105-B100-2-19 / configure_router.fm / 05.06.2003
Remote Management
Remote management enables a PC that is not on your local network to be used to
configure the Gigaset Router with a standard Web browser.
◆
In the System menu, select Remote Management.
◆
In Host address enter the IP address of the PC that is to have access to the router's
user interface from outside your local network.
◆
Check the Enabled box.
◆
To apply the settings click on APPLY.
i
◆
Remember that the Internet Service Provider may assign a
dynamic IP address to the PC and so that it will change. Make sure
that the PC always has the same IP address.
◆
If you use the IP address 0.0.0.0, any PC can be used to manage
the Gigaset Router.