SMC Networks Wireless Broadband Router - Manual (Page 10)

-9-
3. Set up WAN connection: Connect an Ethernet cable from the WAN port to your
cable/xDSL modem or Ethernet backbone. Figure 2-3 illustrates the WAN
connection.
4. Power on:
By connecting the power cord to the power inlet and turning the power switch on, this
product will automatically enter the self-test phase. When it is in the self -test phase,
the indicators M1 and M2 will be lighted ON for about 10 seconds, and then M1 and
M2 will be flashed 3 times to indicate that the self-test operation has finished. Finally,
the M1 will be continuously flashed once per second to indicate that this product is in
normal operation.