SMC Networks Wireless Broadband Router - Manual (Page 42)

-41-
Appendix A: TCP/IP Configuration for Windows 95/98
This section advises on how to install TCP/IP protocol into your personal computer. It
assumes you have successfully installed one network card on your personal computer. If
not, please refer to your network card manual. Also, Section A.2 tells you how to set
TCP/IP values for working with this IP Sharer correctly.
A.1 Install TCP/IP Protocol Into Your PC
1. Click Start button and choose Settings, then click Control Panel.
2. Double click Network icon and select Configuration tab in the Network window.
3. Click Add button to add network component into your PC.
4. Double click Protocol to add TCP/IP protocol.