Sanyo AVP-428 - Manual (Page 21)

Memorizing the Channels
Selecting the Signal Source
Your LCD TV can memorize and store all of the available channels for both antenna and cable channels. After the
available channels are memorized, use CH+/- to scan through the channels.
Press Menu to display the menu main
1
Before your LCD TV can memorize the available channels, you must specify the type of signal source that is
connected to the unit. (i.e., an antenna or cable system)
Press CH repeatedly to select CH. +/-
2
Press Enter to access the submenu.
3
Press Enter to toggle TV or Cable.
4
If you are connected to an antenna, please select TV. If you use
cable, select cable.
Storing Channels in Memory Automatically
Press CH- repeatedly to highlight Auto Search.
4
Press Enter to store channels in memory automatically.
5
The unit will begin memorizing all of the available channels. During the
process of the Auto Search, you can Menu to exit.
MAIN MENU
TV/Cable
Channel No
Add/Erase
Auto Search
MAIN MENU
TV/Cable
Channel No
Add/Erase
Auto Search
The TV/Cable menu item will be highlighted automatically.
MAIN MENU
TV/Cable
Channel No
Add/Erase
Auto Search
Auto Searching
Ch. Num: 8
Menu to exit
Press Menu to display the menu main
1
Press CH repeatedly to select CH. +/-
2
Press Enter to access the submenu.
3
Cable
Setup
Picture
Sound
CH
System
OSD
TVPC
Setup
Picture
Sound
CH
System
OSD
TVPC
Setup
Picture
Sound
CH
System
OSD
TVPC
18