Sanyo AVP-428 - Manual (Page 34)

Setting Sleep Timer
Adjusting Back Light of the Panel
Freezing the Picture
Using Hotkeys
Press the Sleep button repeatedly to set a sleep time to automatically turn
off the unit. Each press of the button, the value changes as below.
Sleep: 5 min.
Off 5 minutes 10 minutes 15 minutes 30 minutes
Press the BK button repeatedly to select the back light of the panel. There are
4 levels of the back light for adjustment.
Back Light 1
Press the Still button to hold on the image on the screen (the video sources
still run). Press again to reactivate the image.
Note:
The freeze function works in TV, Video or S-video mode only.
For the sake of protecting the screen, please do NOT freeze a picture for a long time. “Burn-in” damage is not
covered by warranty.
Setting Audio Mode
Press the Stereo button repeatedly to select the audio mode between MONO,
SAP and STEREO.
Choose STEREO for channels that are broadcasting in stereo.
Choose MONO for channels that are broadcasting in mono, or if you are having difficulty receiving a stereo
signal.
31