Sony PCV-RXP-RZP - Manual (Page 50)

VAIO Digital Studio System Reference Manual 36
Removing a Memory Module
You may need to remove a memory module if you change the memory
configuration or replace a bad module. By default, your computer’s
memory sockets are filled with DDR-DIMM modules.
1
Remove the side panel (see “Removing the Side Panel” on page 24).
2
Remove the power supply (see “Removing the Power Supply
(PCV-RX series models)” on page 49).
*
3
Locate the memory module you wish to remove.
!
Before opening the system unit, save and close all open files, exit all open
applications, turn off the power to all attached peripheral devices, shut down
the computer, and unplug the power cord.
✍
Remove the power supply to access the memory modules underneath. *
!
Touch any exposed metal part of the chassis to discharge static electricity in
your body before handling the memory module.
* Applicable to PCV-RX models only.