Sharp OZ-770 - Manual (Page 8)

Getting Started 6
Reset button
Initializes and resets
the Organizer.
Getting the Organizer Up and Running
Installing the batteries
1. Set the battery replacement switch on the bottom of the
Organizer to REPLACE BATTERIES (a red dot becomes
visible).
2. Slide the battery cover off.
3. Insert two batteries on top of the ribbon tab, making sure
they are positioned correctly according to plus (+) and
minus (-) polarity, as shown below.
Battery replacement switch
Locks the battery compartment
to prevent access to the batteries.
Battery compartment
4-pin Cable Jack
Connects 4-pin Communication
Cable for PC synchronization.