Sony LF-V30 - Manual (Page 11)

Se
tup a
nd Ca
b
le Con
n
ec
tions
11
Setup and Cable Connections
To keep the Base Station stable, attach the Base
Station stand.
Note
Place the Base Station at least 4 inches (10 cm) away
from the wall.
Insert the claws of the stand into the holes on the
bottom of the Base Station and slide the stand
forward until they click into place. The two claws
differ in size. Fit each claw into its respective
hole.
Removing the Base Station stand
Turn the Base Station upside down on a flat stable
surface and slide the stand as indicated by the
“RELEASE” mark.
Note
Use only the supplied AC power adapter.
Attaching the Base
Station stand
Holes
Stand
Claws
Connect the power
cord to the Base
Station
IR
BLASTER
LAN
1
2
VIDEO 1
VIDEO 1
WLAN
AP
CLIENT
IN
IN
OUT
VIDEO
AUDIO
L
R
Y
PB
PR
Y
PB
PR
VIDEO
AUDIO
L
R
VIDEO
AUDIO
L
R
VIDEO
AUDIO
L
R
DC IN 12V
OUT
VIDEO 2
(VIDEO/COMPONENT)
VIDEO 2
(VIDEO/COMPONENT)
S VIDEO S VIDEO
To DC IN
Base Station rear panel
Wall outlet
Power cord
(supplied)
AC power adapter
(supplied)
Connect the power cord to the Base Station AC power
adapter, and the AC power adapter to the DC IN jack on
the Base Station, then plug the power cord into a wall
outlet.