Sony LF-V30 - Manual (Page 8)

8
W
h
at i
s
the
Loc
atio
nFree
®
B
ase
Stati
on?
1 VIDEO 1 IN (S-VIDEO/VIDEO/AUDIO) terminal ( 1 page 13)
Connect audio cables and either a video or S-Video cable.
2 VIDEO 2 IN (COMPONENT/VIDEO/AUDIO) terminal
( 1 page 13)
Connect audio cables and either component video cables or a video
cable.
3 VIDEO 1 OUT (S-VIDEO/VIDEO/AUDIO) terminal
( 1 page 13)
Connect audio cables and either a video or S-Video cable. The
VIDEO 1 OUT terminal outputs the signals input from the VIDEO
1 IN terminal.
4 WLAN switch ( 1 page 21)
Changes the Wireless mode of the Base Station. If you set the
switch to AP, the Base Station works in the Access Point mode, in
which the Base Station connects to a router via a LAN cable and
works as a wireless access point. If you set the switch to CLIENT,
the Base Station works in the Client mode, in which the Base
Station connects to a wireless router wirelessly.
5 LAN port ( 1 page 21)
Connect a LAN cable.
6 IR BLASTER 1/2 port ( 1 page 16)
Connect the IR Blaster (supplied). You can purchase another IR
Blaster to connect to one of the ports.
7 VIDEO 2 OUT (COMPONENT/VIDEO/AUDIO) terminal
( 1 page 13)
Connect audio cables and either component video cables or a video
cable. The VIDEO 2 OUT terminal outputs the signals input from
the VIDEO 2 IN terminal.
8 DC IN jack ( 1 page 11)
Connect the AC power adapter (supplied).
Rear
IR
BLASTER
LAN
1
2
VIDEO 1
VIDEO 1
WLAN
AP
CLIENT
IN
IN
OUT
VIDEO
AUDIO
L
R
Y
P B
P R
Y
P B
P R
VIDEO
AUDIO
L
R
VIDEO
AUDIO
L
R
VIDEO
AUDIO
L
R
DC IN 12V
OUT
VIDEO 2
(VIDEO/COMPONENT)
VIDEO 2
(VIDEO/COMPONENT)
S VIDEO S VIDEO