Kodak DP2900 User Manual
Page 19
Setting up the Projector
19
Note:
If you are connecting an older MACINTOSH computer that
does not have a 15-pin connector, you must use a
MACINTOSH adaptor.
Do you want to control the computer’s mouse from the
projector’s remote or keypad?
Note:
The USB mouse is supported for use with Windows 98,
Windows 2000, and Apple OS 8.5 and higher only. You do
not need to restart your computer after connecting a USB
mouse to use it (it is hot-pluggable).
1. Plug the
end of the M1-DA analog computer cable into
the mouse connector on your computer.
Do you want to play your computer’s audio on the
projector?
1. Plug either end of the audio cable into the audio connector on
your computer.
2. Plug the other end of the audio cable into the
connector on
the projector.
Now you’re ready to turn on the projector and your computer. Skip to
“Starting the Projector” on page 22.
in
in
audio cable
M1-DA analog computer cable
USB mouse