Connecting a video source – Kodak DP2900 User Manual
Page 20
User Guide KODAK DP2900 Digital Projector
20
Connecting a Video Source
If your video source uses a round, one-prong composite video
connector, you’ll need only the audio cable, audio adapter, and
composite video cable that shipped with the projector.
Note:
HDTV sources are connected to the projector using the
M1-DA computer cable. See the previous pages for details.
If your video source uses a round, four-prong S-video connector,
you’ll need an S-video cable in addition to the audio cable and audio
adapter. The S-video cable is sold separately.
To connect to a video source:
1. Plug the composite video cable’s yellow connector into the
“video-out” connector on your video source. This connector may
be labeled “To Monitor.”
•
If you’re using an S-video cable, connect it to the “S-video
out” connector on the video source.
&DXWLRQ <RXU YLGHR VRXUFH PD\ DOVR KDYH D ´9LGHR 2XWµ
FRQQHFWRU IRU D FRD[LDO FDEOH FRQQHFWLRQ '2 127 XVH
WKLV WR FRQQHFW WR WKH SURMHFWRU
2. Plug the other yellow connector into the composite video
connector
on the projector.
•
If you’re using S-video, plug the other end of the cable into
the “S-video” connector
on the projector.
Connecting with a composite video cable:
in
in
composite video
audio cable
audio
adapter
cable