Kodak SRP 30 - Manual (Page 100)

Settings
Printer Settings
1. Touch:
•
Settings
•
Machine settings
•
Printer
2. Touch the following buttons to define the printer settings:
•
Overlapping
Indicate the percentage by which the digitized image will overlap the exposed
paper. The range is 0 to 10%.
•
Master Paper
Define the paper used most frequently as the Master paper. The MBL (Master
Balance) is performed on this paper.
•
Auto-MBL
Enable or disable.
•
MBL max. rep.
When Auto-MBL is enabled, enter how often the system should automatically
repeat the MBL test if the result is not within tolerance. The range is 1 to 10.
•
PBL max. rep.
Enter how often the system should automatically repeat the PBL (Paper
Balance) test if the result is not within tolerance. The range is 1 to 10.
3. Touch Save to save the settings or Cancel to return to the previous screen
without saving.
KODAK PROFESSIONAL SRP 30 Laser Printer 4-25