Kodak SRP 30 - Manual (Page 235)

Operator’s Guide
System Errors
Avoiding Handling Errors
CAUTION: Never turn off the SRP 30 Laser Printer with the main switch
because this may:
•
Reduce the service life of the blue/green laser considerably
because the laser fan does not remain on to cool the laser.
•
Cause problems with the main computer. The operating
system may have to be reinstalled. The main computer should
always be shut down using End of work / Shutdown.
•
Cause paper jams if not all prints have exited the paper
processor.
Error Messages
Error messages can appear in two ways:
1
1. In the Status line (1) as information or warning messages that do not need to be
confirmed:
Work can continue in some cases, but you should perform the required
operations without delay (for example, refilling chemicals or emptying the effluent
tank).
7-2 KODAK PROFESSIONAL SRP 30 Laser Printer