Konica Minolta NS-55E560A11 - Manual (Page 16)

12
NS-55E560A11 Insignia 55" LED-LCD TV, 1080p
www.insigniaproducts.com
Connecting a computer
To connect a computer:
1 Make sure that your TV’s power cord is
unplugged and the computer is turned off.
2 Connect a VGA cable to the PC VGA jack on the
side of your TV and to the VGA jack on the
computer.
3 Connect an audio cable with stereo mini plugs
to the PC/DVI AUDIO IN jack on the side of your
TV and to the LINE OUT or AUDIO OUT jack on
the computer.
To play video from the computer:
1 Turn on your TV, then press INPUT to open the
Source List.
2 Press or to select VGA, then press ENTER.
3 Turn on the computer and adjust the display
properties if necessary.
Connecting headphones
The TV speakers are muted when headphones are
attached.
To connect headphones:
• Connect headphones to the HEADPHONE jack on
the side of your TV.
Tip
Some computers have an HDMI jack. You can use an
HDMI cable to connect the computer for a better
picture.
Note
The VGA cable should be a 15-pin D-Sub (analog
RGB) cable.
Back of TV
VGA cable
Audio cable with
stereo mini plugs
Warning
Loud noise can damage your hearing. When using
headphones, use the lowest volume setting on your
headphones that still lets you hear the sound.
Back of TV