Konica Minolta NS-55E560A11 - Manual (Page 21)

17
Insignia 55" LED-LCD TV, 1080p
www.insigniaproducts.com
2 Press or to highlight Audio, then press or
ENTER. The Audio menu opens.
3 Press or to highlight an option, then press
ENTER to access the option. You can select:
• Equalizer Settings—Selects and changes the
audio frequency.
• Balance—Adjusts sound to the left or right
speakers.
• Digital Audio/SPDIF—Sends digital audio to
an external audio system. You can select Off,
RAW, or PCM.
• SRS TruSurroundHD—Provides the ultimate
home theater sound solution. You can select
On or Off.
• MTS/SAP—Selects the sound mode (for
analog channels only). You can select:
• Mono—Produces a clearer sound if stereo
sound is difficult to hear.
• Stereo—Produces dynamic stereo sound
for sporting events and concerts.
• SAP—Selects a second language,
weather report, or added commentary, if
available.
• Audio Language—(Digital TV only) Selects
the audio language if multiple languages are
available.
• Auto Volume—Automatically adjusts volume
to be consistent across programs and
channels.
• Reset Audio Settings—Resets all audio
settings to the factory defaults.
4 Press or to adjust the option, or press or
to select a setting.
5 Press MENU to return to the previous menu, or
press EXIT to close the menu.
Selecting the audio mode
To select the audio mode for an analog channel:
• Press MTS/SAP one or more times. You can select:
• MONO—Select this option if there is noise or
static on weak stereo broadcasts.
• STEREO—Select this option for programs
broadcast in stereo.
• SAP—Select this option to listen to a
secondary audio program, if available.
To select the audio mode for a digital channel:
• Press MTS/SAP. If an audio track is available, it
plays.
Changing channel settings
Scanning for channels
When you scan for channels, your TV searches for
channels with signals and stores the channel
information in the channel list. When you press
CH + or CH –, your TV goes to the next or previous
channel in the channel list.
To scan for channels:
1 Press MENU. The on-screen menu opens.
2 Press or to highlight Channels, then press
or ENTER. The Channels menu opens.
Note
Mono is automatically selected if the program is
broadcast in mono.
TM
ENTER MENU EXIT
Pictur e Audio Channels Settings
Audio
Adjust Settings to effect sound quality .
Move Select Previous Exit
Equalizer Setting
Balance 0
Digital Audio/SPDIF PCM
SRS TruSurroundHD Off
MTS/SAP Stereo
Audio Language English
Auto V olume Off
Reset Audio Settings
Note
Unless otherwise noted, all tasks in this section are
based on using the remote control.
Note
• You do not need to scan for channels unless the
available channels changed after you ran the
Setup Wizard.
• You do not need to scan for channels if you are
using a cable box or satellite box.
TM
ENTER MENU EXIT Move Select Previous Exit
Picture Audio Channels Settings
Picture
Mode Custom
Brightness 40
Contrast 52
Color 50
Tint 0
Sharpness 5
Advanced Video
Reset Picture Settings
Adjust Settings to affect picture quality.
TM
ENTER MENU EXIT
Pictur e Audio Settings Channels
Channels
Adjust channel options.
Move Select Previous Exit
Auto Channel Search
Add/Skip Channel
Auto Zoom On