Kyocera Cyclops K325 - Manual (Page 19)

User Guide for the Cyclops Phone 11
3 M
AKING AND
A
NSWERING
C
ALLS
Phone calls
Making a call
Make sure you are in an area where a signal
can be received. Look for the
symbol on the
main screen. The more bars you see in this
symbol, the stronger the signal. If there are no
bars, move to where the signal strength is better.
When the phone has been idle for a time, it
changes to power save mode. When you see your
phone’s screen dim, press any key to return to
normal operating mode.
Entering a number
1. Enter the phone number and press .
2. Press to end the call.
Using voice dialing
Voice dialing requires that a contact be saved with
a voice tag. See page 45.
1. Press to initiate voice dialing.
2. Say the name of the contact when prompted.
The phone places the call.
3. Press to end the call.
Answering a call
When a call comes in, the phone rings, vibrates,
or lights up, and an animated icon appears.
The phone number of the caller also appears if it
is not restricted. If the number is stored in your
Contacts directory, the contact name appears.
• Press
to answer the incoming call.
- or -
• Press to answer the incoming call and
turn on the speakerphone.
Answering calls using the flip
You can set the phone to answer immediately
when you open the flip.
• Select
Menu
→
Settings
→
Convenience
→
Open to answer
→
Enabled .
– Select Disabled to have the phone
continue ringing when you open the flip.
Answering calls using “Any key”
You can set the phone to answer calls
when you press any key on the keypad except
,
, or .
• Select Menu
→
Settings
→
Convenience
→
Any key
→
Any key answer .
Note: You cannot use Any key answer and Any
key mute at the same time, see “Silencing a call
using “Any Key”” on page 12.