Kyocera Cyclops K325 - Manual (Page 51)

User Guide for the Cyclops Phone 43
Unlocking the phone
1. From the main screen, to select Unlock .
2. Enter your four-digit lock code.
Changing your lock code
The lock code is typically 0000 or the last 4 digits
of your phone number.
Important: Write down your lock code if you
change it. Virgin Mobile cannot unlock your
phone for you if you forget your lock code.
1. Select Menu
→
Settings
→
Security .
2. Enter your four-digit lock code
3. Select Change lock code . A message appears:
“Change Code?”
4. Press to select Yes and enter a new four-
digit code.
5. Enter your new lock code again.
Designating emergency numbers
The emergency numbers feature allows you to
specify three personal phone numbers that can be
called when the phone is locked.
1. Select Menu
→
Settings
→
Security .
2. Enter your four-digit lock code.
3. Select Emergency numbers .
4. Select an Unassigned slot.
5. Enter the phone number, including the area
code. Do not enter 1 before the area code.
6. Press to select Done .
Note: To make a call to an emergency number
from a locked phone, you must dial the number
(including area code) exactly as it was stored in
Emergency Numbers.
Erasing all contacts
You can erase all entries from your
Contacts directory.
1. Select Menu
→
Settings
→
Security .
2. Enter your four-digit lock code.
3. Select Erase contacts .
4. Select Yes to erase all contacts. A message
appears: “Erase ALL Contacts?”
5. Press to select Yes to erase all contacts.
Connecting to a TTY/TDD device
You can connect the phone to a compatible TTY
device for the hearing impaired.
Note: Enable TTY
only when using the phone with a TTY device.
1. Connect the TTY device to the phone via the
headset jack
2. Enter ##889 from your keypad.
3. Press to select the TTY option.
Setting position location
This setting allows you to share your location
information with network services other than
emergency services (For example: 911, 111, 999,
and 000) in markets where service is
implemented.