Kyocera Cyclops K325 - Manual (Page 55)

User Guide for the Cyclops Phone 47
Answering automatically
You can set your phone to answer automatically.
Note: This setting also works with the portable
hands-free headset.
• Select Menu
→
Settings
→
Accessories
→
Auto answer
→
After 5 seconds .
Answering using voice commands
If Auto-Answer is turned off, you can use a voice
command to answer an incoming call using the
installed hands-free headset.
• Select
Menu
→
Settings
→
Accessories
→
Auto answer
→
Disabled .
To activate the Voice Answer setting:
1. Select Menu
→
Settings
→
Call options
→
Voice answer .
2. Highlight Enabled and press .
To answer a call:
When you receive an incoming call, the phone
responds: “Incoming call, answer?” If the caller is
recognized as a contact entry in your phone, then
the phone says “Incoming call from
(Name), answer?”
• Say “
Yes ” or press any key except .
Ignoring an incoming call
To ignore an incoming call, do one of
the following:
• Say “
No ” and press to silence the alert.
• Remain silent. The voice alert repeats twice
and the phone rings once, then returns to the
main screen.
Training voice recognition
If your phone is having trouble recognizing your
voice, you can train it with the commands
Yes ,
No , and Wake up .
1. Select Menu
→
Settings
→
Call options .
2. Select Voice training .
3. Read the message and press to select OK
and continue. Cancel returns you to the
previous screen.
4. Select Train All or the item you want to train.
5. Follow the prompts for each word until
training is complete.