Specifications – Kenwood VR-716 User Manual

Page 39

Advertising
background image

39

EN

Specifications

Caution : Read this page carefully to ensure safe

operation.

AUDIO section

Rated power output during STEREO operation

Effective power output during SURROUND operation

FRONT (40 ~ 20 kHz, 0.7% T.H.D. at 8

one channel driven)

............................................................................... 100 W + 100 W

CENTER (40 ~ 20 kHz, 0.7% T.H.D. at 8

one channel driven)

.............................................................................................. 100 W

SURROUND (40 ~ 20 kHz, 0.7% T.H.D. at 8

one channel driven)

100 W + 100 W
SUBWOOFER (80 Hz, 0.7% T.H.D. at 8

one channel driven)

.............................................................................................. 100 W

Total harmonic distortion .......................... 0.05% (1 kHz, 50 W, 8

)

Frequency response

CD/DVD ...................................... 20 Hz ~ 70 kHz, +0 dB, –3.0 dB

Signal to noise ratio (IHF’66)

CD/DVD, AUX, TAPE, VIDEO1, VIDEO2 ............................ 95 dB

Input sensitivity / impedance

CD/DVD ................................................................ 550 mV / 47 k

DVD/6CH INPUT .................................................. 550 mV / 47 k

Output level / impedance

TAPE REC ............................................................... 550 mV / 1 k

Tone control

BASS ................................................................ ±10 dB (at 100 Hz)
TREBLE ............................................................ ±10 dB (at 10 kHz)

Loudness control

VOLUME at -30dB level ................................... +8 dB (at 100 Hz)

DIGITAL AUDIO section

Sampling frequency ...................... 32 kHz, 44.1 kHz, 48 kHz, 96 kHz
Input level / impedance / wave length

Optical ........................... (–15 dBm ~ –21 dBm), 660 nm ±30 nm
Coaxial ................................................................... 0.5 Vp-p / 75

100 watts per channel minimum RMS, both channels driven, at 8

from 40 Hz to 20 kHz with no more than 0.7% total harmonic
distortion. (FTC)

Notes

1. KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice.
2. The full performance may not be exhibited in an extremely cold location (under a water-freezing temperature).

VIDEO section

VIDEO inputs / outputs

VIDEO (composite) ............................................... 1 Vp-p / 75

S-VIDEO inputs / outputs

S-VIDEO (luminance signal) ................................ 1 Vp-p / 75

S-VIDEO (chrominance signal) ..................... 0.286 Vp-p / 75

FM tuner section

Tuning frequency range ................................. 87.5 MHz ~ 108.0 MHz
Usable sensitivity (MONO)

................. 1.3 µV (75

)/ 13.2 dBf (75 kHz DEV., SINAD 30 dB)

50dB quieting sensitivity

STEREO ..................................................... 28 µV (75

)/ 40.2 dBf

Total harmonic distortion (1 kHz)

MONO .......................................................... 0.5% (71.2 dBf input)
STEREO ....................................................... 0.7% (71.2 dBf input)

Signal to noise ratio (1 kHz, 75 kHz DEV.)

MONO ........................................................ 75 dB (71.2 dBf input)
STEREO ..................................................... 68 dB (71.2 dBf input)

Stereo separation (1 kHz) ........................................................... 40 dB
Selectivity (±400 kHz) ................................................................. 70 dB
Frequency response .................... (30 Hz ~ 15kHz), +0.5 dB, –3.0 dB

AM tuner section

Tuning frequency range

10 kHz step .................................................. 530 kHz ~ 1,700 kHz

Usable sensitivity (30% mod., S/N 20 dB) ........ 16 µV / (600 µV/m)
Signal to noise ratio (30% mod. 1 mV input) ........................... 50 dB

GENERAL

Power consumption .................................................................... 2.2 A
AC outlet

SWITCHED ......................................... (total 150 W, 1.25 A max.)

Dimensions .................................................... W : . 440 mm (17-5/16")

H : 143 mm (5-5/8")
D : 303 mm (11-15/16")

Weight (Net) ............................................................... 8.7 kg (19.18 lb)

*5335/34-40/EN

25/1/03, 2:50 am

39

Advertising