Kalorik USK HA 33143 - Manual (Page 10)

10 USK HA 31535 / 33143 - 100414
Assembly page 10/17
• Install the desired disc (8), (9) or (10) onto the disc holder (7).
• Place disc holder onto the driver.
• Place the lid on the bowl, turn the lid clockwise until it interlocks
on the bowl.
• Put food into the feeding chute.
• Use pusher (6) to push the food down for processing.
• Turn dial clockwise on position “1” (LOWER) for soft food or
position “2” (HIGHER) for hard food.
• To turn off, turn dial back counter-clockwise on position “O”
(STOP).
Tips and Warning
• Choose the desired disc according to the processed food and
desired shape of food.
• Push softly when feeding food.
• Pre-cut food into smaller pieces according to the diameter of
feeding tube.
• Feed gradually for better results. When cutting soft food, choose
a lower speed (Position “1” to avoid the food turning soupy. If a
large quantity food needs to be cut, please cut it in several
batches. Please process maximum 40 Oz. per batch. Respect the
recommended pauses in the operation between batches.
CITRUS JUICER ASSEMBLY
• Position the driver (2) upright on motor base (1).
• Position the processing bowl (3) around the driver onto the motor
base and turn clockwise to lock it on the motor base.
• Place the citrus juicer sieve (14) on the bowl and turn clockwise to
lock into position.
• Position the Citrus Juicer Cone (15) on the driver.
• Turn dial clockwise on position “1” (LOWER)
• Juice the citrus by pressing the citrus cut in half on the rotary
cone.
• To turn off, turn dial back counter-clockwise on position “O”
(STOP).