Kalorik USK HA 33143 - Manual (Page 7)

7 USK HA 31535 / 33143 - 100414
Assembly page 7/17
ASSEMBLY AND OPERATION
CHOPPING BLADE ASSEMBLY
• Position the driver (2) upright on motor base (1).
• Position the processing bowl (3) around the driver onto the motor
base and turn clockwise to lock it on the motor base.
• Place blade adaptor (4) onto the driver.
• Cautiously place the chopping blade (11) onto the blade
adaptor. The blade shall lie flat, if in correct position, and not be
wobbly
• Place the food into the bowl.
• Place lid on bowl, turn clockwise until the lid interlocks on bowl.
• Place pusher into feeding chute
• Turn dial clockwise on position “1” (LOWER) or “2” (HIGHER)
depending on the desired results. If some parts are not chopped
to your liking, use the ”P” position (for “Pulse”) by turning
counterclockwise until getting the desired results.
• To turn off, turn dial back counter-clockwise on position “O”
(STOP).
P r o c e s s e d
F o o d
M a x . q u a n t i t y
p e r b a t c h
C h o c o l a t e ≤ 1 0 0 g
C h e e s e ≤ 2 0 0 g
m e a t ≤ 5 0 0 g
Te a o r Sp i c e 5 0 ~ 1 0 0 g
F r u i t &
Ve g e ta b l e
1 0 0 ~ 3 0 0 g
O n i o n ≤ 5 0 0 g
Standard chopping period: 30-60 sec.
Tips and Warning
Always assemble the chopping blade inside the bowl before adding
the food (do NOT add the blade after the food is already in the
bowl).