D-sub pin assignments, 1 red 6 red gnd 11 gnd, 2 green7 green gnd 12 no connection – Knoll Systems HT201 User Manual

Page 12

Advertising
background image

Connecting the remote mouse receiver to an IBM PC/AT computer

Connect the IBM/Mac connector on the remote mouse receiver and PC's mouse port with the
supplied serial cable.


Connecting the remote mouse receiver to an IBM PS/2 or Macintosh computer

Connect the supplied serial cable to the IBM/Mac connector on the remote mouse receiver.
Connect the supplied mouse adapter to the other end of the serial cable and the computer mouse
port. Note that two types of mouse adapters are supplied; one is for IBM PS/2 and the other is for
Macintosh.

.


D-Sub Pin Assignments

1 Red 6 Red Gnd 11 GND
2 Green

7 Green Gnd 12 No Connection

3 Blue 8 Blue Gnd 13 Horizontal Sync
4 GND

9 N/C

14 Vertical Sync

5 GND 10 Digital Gnd 15 No Connection













12

Advertising
This manual is related to the following products: